how to migrate DCR v2.6 Net from XP to Windows 8

Enter any questions about legacy Schick hardware and software.

how to migrate DCR v2.6 Net from XP to Windows 8

Postby marianellaluciani » Mon May 14, 2018 5:21 pm

Hi.

I am migrating my computer with Windows XP to another with Window 8. I currently use CDR Ver 2.6 Network.

Which CDR version should I use and how do I migrate the photos and patient data?
marianellaluciani
 
Posts: 3
Joined: Mon May 14, 2018 4:59 pm

Re: how to migrate DCR v2.6 Net from XP to Windows 8

Postby dlindberg » Tue May 15, 2018 9:32 am

Dear marianellaluciani ,

The CDR 2.6 software is not compatible with Windows 8 software. The current software is CDR DICOM 5.14. To convert CDR 2.6 files you will first need to install CDR DICOM 4.5 on a Windows 7 system with CDR 2.6 and then run the conversion utility. The Utility and the instructions are available at the following link:
https://www.schickbysirona.com/items.php?itemid=7881

Best Regards,
Don
Dentsply Sirona
Imaging Support USA
dlindberg
Moderator
 
Posts: 1420
Joined: Thu Jan 01, 2004 7:33 pm
Location: Long Island City, NY

Re: how to migrate DCR v2.6 Net from XP to Windows 8

Postby marianellaluciani » Tue May 15, 2018 12:20 pm

Hi Support, Thanks for the quick reply.

To download the new versions of CDR outside of the USA I have to use a local dealer, but none of them appear in Venezuela.

How should I proceed to request the downloads?

ML
marianellaluciani
 
Posts: 3
Joined: Mon May 14, 2018 4:59 pm

Re: how to migrate DCR v2.6 Net from XP to Windows 8

Postby jmandia » Tue May 15, 2018 3:28 pm

Dear marianellaluciani , Outside USA, FONA Dental provides support, and sales. Please contact them: http://srvcontact.fonadental.com/fonafo ... ryPageFona or
http://www.fonadental.com/contact-us/

Best Regards,
Dentsply Sirona Imaging Support USA
jmandia
 
Posts: 351
Joined: Wed May 03, 2006 8:40 am
Location: Long Island City, NY

Re: how to migrate DCR v2.6 Net from XP to Windows 8

Postby marianellaluciani » Mon May 21, 2018 3:08 pm

Thank you very much for the information.

Regarding the CDR DICOM 4.5 version, the FONA provider tells me that I must request it through ShickbySirona. How is the procedure to download the software?

ML
marianellaluciani
 
Posts: 3
Joined: Mon May 14, 2018 4:59 pm

Re: how to migrate DCR v2.6 Net from XP to Windows 8

Postby jmandia » Tue May 22, 2018 1:03 pm

Dear marianellaluciani, please email [email protected] with your request, and email address, so we can privately email you CDR 4.5. After conversion, you then need to contact FONA Dental for their version of current imaging software- Oriswin, and drivers for your CDR hardware.

Best regards,
Dentsply Sirona Imaging Support
jmandia
 
Posts: 351
Joined: Wed May 03, 2006 8:40 am
Location: Long Island City, NY


Return to Legacy Hardware / Software

Who is online

Users browsing this forum: No registered users and 10 guests

cron